Products

SITRANS FUS1010 (Standard)

• Versatility; there is no need to change meters when operating conditions change

• No need to cut pipe or stop flow

• No pressure drop or energy loss

• Wide turn-down ratio

• Choice of single channel or dual channel/dual path, with doppler capability. Four channel/four path optional.

• Dual path allows for two sets of sensors to be set up on one pipe and averaged for higher accuracy

• ZeroMatic Path automatically sets zero without stopping flow and reduces zero drift, even at low flow

SONOKIT

SONOKIT is a transit time based ultrasonic flow meter for retrofitting on existing pipelines. The kit includes all necessary parts and special tools to make the installation as 1- or 2-track flow meter.

The set is made for installation on empty pipes or pipes under pressure without process shut-down (hot-tap).

Please contact Siemens for further information on hot-tap tools and instructions.

SONOKIT has inline transducers (in contact with media) which assure superior accuracy and performance.

• Cost-effective solution – contains all the necessary components for retrofitting

• No bypass installation necessary – withstands pressures up to 40 bar (580 psi) and media temperatures between -20 °C and +200 °C (-4 °F and +392 °F)

• Solid construction and no moving parts for a 100 % maintenance and obstruction-free flow meter

• The SONOKIT comes with transducers in IP68 enclosure

• Automatic calculation of the calibration factor when pipe geometry data are entered in the transmitter

• FUS060 transmitter versions with HART or PROFIBUS PA

• FUS080 transmitter, battery or mains-powered

Thickness Gauge

The thickness gauge is used to measure the wall thickness of the pipe that a clamp-on ultrasonic flow meter is installed on. The wall thickness value is a vital factor in the flow computation model and a prerequisite for precise clamp-on ultrasonic flow measurement . When measuring any pipe wall thickness the thickness gauge can also be used as a stand-alone tool used to measure the wall thickness of any metallic or non-metallic pipe materials capable of acting as an ultrasonic wave conductor.

SITRANS FUP1010 (Portable)

SITRANS FUP1010 clamp-on non-intrusive ultrasonic flow transmitter offers maximum versatility plus battery power for portable field use. It can operate in either WideBeam transit time or reflexor (Doppler) mode, making it suitable for virtually any liquid, even those with high aeration or suspended solids.

SITRANS FUP1010 is available in single and dual channel or dual path configurations, with IP67 weatherproof enclosure.

¦Benefits

• Battery power facilitates field use; the meter is easily transported from one installation to another – saving time for surveys, monitoring and temporary installations

• Weatherproof enclosure can be used outdoors and left in place without concern for rain damage

• Versatility - there is no need to change meters when operating conditions change

• No need to cut pipe or stop flow

• No pressure drop or energy loss

• Wide turn-down ratio

• ZeroMatic Path automatically sets zero without stopping flow and reduces zero drift, even at low flow

SITRANS FST020 (Basic)

SITRANS FST020 offers reliable flow measurement at a much lower cost than other clamp-on ultrasonic flowmeters, with flow rate accuracy of ± 0.5 % to 1.0 % for most applications.

• No need to cut pipe or stop flow

• No pressure drop or energy loss

• Wide turn-down ratio

• Optional WideBeam technology ensures high performance.

• ZeroMatic Path automatically sets zero without stopping flow and eliminates zero drift.